Battens for KA Sails

Battens for KA Sails

Post by J Koeps » Wed, 13 Oct 1993 02:16:10


The wind here in Denver was as good as wind gets out the west yesterday
afternoon it was the normal 0 to 60 mph gust but if you can hang on through
the gusts you can fly because the water stays flat.  So I get hit by a 60

clamp is horrible.  So what my problem is I have a new KA sail from
Australia very fast but the two lower camber battens broke in the crash
somehow.  Well, the battens didn't exactly break they have a couple of
carbon tubes over the top of the batten to make them stiffer and the inner
carbon tube shattered at the end.  So my question is does any one know
where I can get KA battens or the tubes the Sail is their race 6.0 m I
bought the sail in Texas it's a '93.  If anyone can help let me know by
e-mail or respond here thanks.

This is me and only me but could just be my imagination.
If there is no wind let it snow.

 
 
 

Battens for KA Sails

Post by Greg Ca » Tue, 19 Oct 1993 16:02:00


JK>Organization: MMC

JK>carbon tube shattered at the end.  So my question is does any one know
JK>where I can get KA battens or the tubes the Sail is their race 6.0 m I
JK>bought the sail in Texas it's a '93.  If anyone can help let me know by
JK>e-mail or respond here thanks.

You can probably get them from Winddance in the Gorge.  They seem to
have everything and do mail order as well. I could get the address if
you wanted.
 Greg  :)

 * OLX 2.1 * Back Up My Hard Drive? I Can't Find The Reverse Switch!