No bridle edo

No bridle edo

Post by niclup » Fri, 25 Mar 2005 23:38:29


Hi,
i have made an Ohashi's No Bridle Edowith plan published in Kite Lines
vol.12 n. 2 (spring - summer- 1997)
In the plan the top and bottom cross spars are two spars of carbon tubing 8
mm. outside diameter and 270 cm long for kite 300 cm. high and 200 cm. wide.
These spars are curved and bowed.
I have tried to place these two spars but without successful. These two
spars are too stiff and too long and I'm not able to place them.
Can you help me to solve this problem
Tanks and good wind

Nicola Lupoli

Visit my site
http://utenti.lycos.it/volere_volare

 
 
 

No bridle edo

Post by flybo » Sat, 26 Mar 2005 12:11:45

Quote:

> Hi,
> i have made an Ohashi's No Bridle Edowith plan published in Kite
Lines
> vol.12 n. 2 (spring - summer- 1997)
> In the plan the top and bottom cross spars are two spars of carbon
tubing 8
> mm. outside diameter and 270 cm long for kite 300 cm. high and 200
cm. wide.
> These spars are curved and bowed.
> I have tried to place these two spars but without successful. These
two
> spars are too stiff and too long and I'm not able to place them.
> Can you help me to solve this problem
> Tanks and good wind

> Nicola Lupoli

> Visit my site
> http://utenti.lycos.it/volere_volare

Iv bridle and fram info if you want to email me Ill send info
I cant get the pic or att to this note FLASH( Iv got 6 old re framed
FORCE 10S  from the 70s IV rebridle and framed they bring back alot
of great fun and still fly great Iv 2 still stock << and yes they fly
like
driveing a mass of power . they are going back a few years but ( ya
buster
they ar a hand full !!! we are talking 16 feet from wing tip to wing
tip.
and stand 5 feet tall when they take off and IV even got the mother of
all
a bfk and a FORCE 20 ... THE 22 FEET FROM WING TIP TO WING TIP  tihs is