NNTP-Posting-Date: Mon, 21 Dec 1998 15:35:37 PDT
Disconnect the wires that go to the warmers and with a Volt ohm meter,
measure to see if you have any resistance between the wires going to the
thumb warmer or hand warmer. They should read somewhere between 5 and 20
ohms. Chances for both to be out are probably slim. Check to make surethe
main power lead going to that side of the handle bar is live when the switch
>I just purchased a Used sled to get into this sport and it came with hand
>All the wires look like they are installed correctly but the right hand one
>thumb warmer doesnt work.
>If the wires look ok what other things should I check before I go out and
>replace the entire thing?
>Thanks for the help