ZRT6 to ZRT7-Help?

ZRT6 to ZRT7-Help?

Post by Scott Will » Tue, 13 Aug 1996 04:00:00


        Well hello sled heads !!!!   As some of you know, my Zirt swallowed
it's gum on my last ride last year after I did some radical porting of
my own and shaved the heads .080" etc.  (But it was fast that day)
Anyway, I want to turn my Zirt 6 into a Zirt 7 which will repair the
port damage caused by me and the Wiseco piston.  (I was going to do
the 700cc thing this season anyway.)  I have been waiting on Dale
Cutler (Cutler's Performance Center) to do his R&D thing with his
700cc project but he has been hit with some problems and his kit will
not be ready this year.  I called PSI today in response to an ad in a
sled magazine and they want $1695 for their aluminum-sleeved 700cc kit
and port job.   That's just a little too much $$$$$ for me.  
        PLEASE, can anyone tell me of someone else in the country that is
marketing a 700cc kit for the Zirt 6  that might be a little less
money?  

Thanks,
        Scott.

------------------------------------------------

'96  ZRT600  Mountain cat  2" track
http://www.vii.com/~scott/
------------------------------------------------

 
 
 

ZRT6 to ZRT7-Help?

Post by Robert Rone » Wed, 14 Aug 1996 04:00:00

Scott,

Try NORTON PERFORMANCE, in Essex Junction Vermont. They are strictly Cat folks
who have a real good rep for making them go!

This may help you.......

Good Luck!

Bob Roney

 
 
 

ZRT6 to ZRT7-Help?

Post by Ken Boba » Wed, 14 Aug 1996 04:00:00

Quote:

>         Well hello sled heads !!!!   As some of you know, my Zirt swallowed
> it's gum on my last ride last year after I did some radical porting of
> my own and shaved the heads .080" etc.  (But it was fast that day)
> Anyway, I want to turn my Zirt 6 into a Zirt 7 which will repair the
> port damage caused by me and the Wiseco piston.  (I was going to do
> the 700cc thing this season anyway.)  I have been waiting on Dale
> Cutler (Cutler's Performance Center) to do his R&D thing with his
> 700cc project but he has been hit with some problems and his kit will
> not be ready this year.  I called PSI today in response to an ad in a
> sled magazine and they want $1695 for their aluminum-sleeved 700cc kit
> and port job.   That's just a little too much $$$$$ for me.
>         PLEASE, can anyone tell me of someone else in the country that is
> marketing a 700cc kit for the Zirt 6  that might be a little less
> money?

> Thanks,
>         Scott.

> ------------------------------------------------

> '96  ZRT600  Mountain cat  2" track
> http://www.vii.com/~scott/
> ------------------------------------------------

Scott

You may want to check with D&D Performance in New York.  They do a lot
with AC performance mods.

Ken Bobak
95 ZR580EFI
96 EXT Deluxe
97 ZR580