KH fusion seat cover on K1 saddle

KH fusion seat cover on K1 saddle

Post by brenda » Fri, 05 Jan 2007 08:54:35


Hello all,

is it possible to remove the cover from a koxx1 trials saddle and
replace it with a KH fusion one?

ALso is the KH fusion cover the same on ALL KH fusion seats?

Thx

--
brendan
------------------------------------------------------------------------
brendan's Profile: http://www.unicyclist.com/profile/13680
View this thread: http://www.unicyclist.com/thread/56359

 
 
 

KH fusion seat cover on K1 saddle

Post by danger_un » Fri, 05 Jan 2007 09:10:20

The KH fusion cover sold as replacement fits all KH Fusion seats and
will fit a Koxx1 saddle.   The Street and Freeride covers that come
with the Fusion saddles are cut to fit the different foam thickness on
these two saddles.

Kris

--
danger_uni
------------------------------------------------------------------------
danger_uni's Profile: http://www.unicyclist.com/profile/21
View this thread: http://www.unicyclist.com/thread/56359

 
 
 

KH fusion seat cover on K1 saddle

Post by MuniAddic » Fri, 05 Jan 2007 09:27:29

Quote:

> The KH fusion cover sold as replacement fits all KH Fusion seats and
> will fit a Koxx1 saddle.   The Street and Freeride covers that come
> with the Fusion saddles are cut to fit the different foam thickness on
> these two saddles.

> Kris

Kris, I have the '07 kh24" Mountain uni, and I really like the new
saddle, but I was curious to know if the seat base is also different
from the '05 base, as there is much less curve in the new version
(which I prefer) and it's also a thinner profile. Was this accomplished
soley by changing the foam thickness in specific areas, or is the base
"flatter" as well?

--
Muni***

"There is an -idea-, of a Patrick Bateman"

"They all float down here"
------------------------------------------------------------------------
Muni***'s Profile: http://SportToday.org/
View this thread: http://SportToday.org/

 
 
 

KH fusion seat cover on K1 saddle

Post by danger_un » Fri, 05 Jan 2007 09:34:35

The saddle frame is the same- just the foam shape was changed.   Keeping
the curvature in the saddle while lowering the curvature in the foam
means that the foam is thickest in the places where you need it most.

Kris

--
danger_uni
------------------------------------------------------------------------
danger_uni's Profile: http://www.unicyclist.com/profile/21
View this thread: http://www.unicyclist.com/thread/56359

 
 
 

KH fusion seat cover on K1 saddle

Post by MuniAddic » Fri, 05 Jan 2007 10:19:46

Quote:

> The saddle frame is the same- just the foam shape was changed.   Keeping
> the curvature in the saddle while lowering the curvature in the foam
> means that the foam is thickest in the places where you need it most.

> Kris

Ok thanks for clarifying, but I forgot to ask about the fusion cover; is
it also the same as the '05 fusion cover? The seams on the cover seem
modified to fit the smaller, thinner profile of the '07 saddle, but I
may be wrong.:)

--
Muni***

"There is an -idea-, of a Patrick Bateman"

"They all float down here"
------------------------------------------------------------------------
Muni***'s Profile: http://SportToday.org/
View this thread: http://SportToday.org/

 
 
 

KH fusion seat cover on K1 saddle

Post by brenda » Sat, 06 Jan 2007 05:03:51

thanks kris, UDC should proabably clarify this on their website, thanks
alot for answering!

--
brendan
------------------------------------------------------------------------
brendan's Profile: http://www.unicyclist.com/profile/13680
View this thread: http://www.unicyclist.com/thread/56359

 
 
 

KH fusion seat cover on K1 saddle

Post by danger_un » Sat, 06 Jan 2007 06:35:09

The cover sold as spares is the same as the '05 but slightly smaller
than the really thick saddles sold before that.    So it fits the
Freeride or '05 saddles just fine, but needs to be tightened a little
more to fit the Street.  

Kris

--
danger_uni
------------------------------------------------------------------------
danger_uni's Profile: http://www.unicyclist.com/profile/21
View this thread: http://www.unicyclist.com/thread/56359

 
 
 

KH fusion seat cover on K1 saddle

Post by hungry4un » Sat, 26 Jul 2008 12:36:04

Quote:

> The KH fusion cover sold as replacement fits all KH Fusion seats and
> will fit a Koxx1 saddle.   The Street and Freeride covers that come
> with the Fusion saddles are cut to fit the different foam thickness on
> these two saddles.

> Kris

Could I take the cover of my red nimbus trials seat and replace it with
a replacement kh fusion seat cover?

--
hungry4uni

If only all bikes were cut in two

'My
Videos'
(http://www.youtube.com/user/mthomasdpm)
*'My
Sponsor' (www.sixsixone.com/)*
------------------------------------------------------------------------
hungry4uni's Profile: http://www.unicyclist.com/profile/16147
View this thread: http://www.unicyclist.com/thread/56359

 Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
                http://www.usenet.com

 
 
 

KH fusion seat cover on K1 saddle

Post by forrestunifrea » Sat, 26 Jul 2008 13:24:43

Quote:

> Could I take the cover of my red nimbus trials seat and replace it with
> a replacement kh fusion seat cover?

Yes.

--
forrestunifreak

'*-My Gallery-*' (http://tinyurl.com/wcrsl)
*www.qu-ax.com* *unicycle for
christ*

Quote:

> Oh... they don't kick bricks, do they?

------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/56359

 Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
                http://www.usenet.com